Guild Video Library

The content of this library is truly a treasure. These are not studio quality videos. They are recorded under shop conditions with all the variables you might expect. However, the sound quality of those posted are quite good. The topics covered over the years are many and hosted by some of the best and most talented woodworkers. You will find demonstrations/lectures by Garrett Hack, Mike Dunbar, Terry Moore, Jere Osgood, Jon Siegel, Matt Wajda, Terri Masaachi, Wayne Marcoux, Al Breed, Al Stirt and many more.

Read more about the Guild Video Library here

159 Records Found
2015
BIG Meeting June 2015 - Part 1
  • Matt Wajda
BIG Meeting June 2015 - Part 2
  • Matt Wajda
BIG Meeting June 2015 - Part 3
  • Matt Wajda
2014
Queen Anne Lowboy—Turning Pad Foot
  • Al Breed
2013
Back Covers of Fine Woodworking Magazine
  • Jonathan Binzen
Tapered Bent Laminations with a Twist
  • Bradley Wolcott
2012
Critical Essentials Al Breed Townsend Chest 3
  • Allan Breed
Critical Essentials Al Breed Townsend Chest 4
  • Allan Breed
Critical Essentials Al Breed Townsend Chest 5
  • Allan Breed
Critical Essentials Al Breed Townsend Chest 6
  • Allan Breed
Critical Essentials Al Breed Townsend Chest 7
  • Allan Breed
Critical Essentials Al Breed Townsend Chest 8
  • Allan Breed
Repairing Turned Architectural Columns
  • Dick Batchelder
Retrospective & Demo of Ball & Claw Carving
  • Jeff Roberts
Retrospective & Discussion—Gary Armstrong
  • Gary Armstrong
Spindle Turning
  • Jon Siegel
Ten Essential Cuts on the Lathe
  • Keith Tompkins
Turned Sculptures with "Minimal Surfaces"
  • Mike Foster
2011
Carving Wildlife
  • Sumner Misenheimer
Conversion Varnish
  • Marty Milkovits
Critical Essentials Al Breed Townsend Chest 1
  • Allan Breed
Critical Essentials Al Breed Townsend Chest 2
  • Allan Breed
David Lamb Retrospective
  • David Lamb
Design and Construction of Turned Furniture
  • Jon Siegel
Hammer Veneering
  • Al Breed
Keynote Address—Design Symposium
  • Dale Broholm
Retrospective Design Slide Lecture
  • Leah Woods
Retrospective Slide Lecture on Design
  • Charles Shackleton
2010
Effective and Efficient Woodworking
  • Garrett Hack
Veneering
  • Terry Moore
Wood Finishing Q+A
  • Dale Vigent
2009
Attributes of Good Design
  • George Saradakis
Explorations in Color and Texture
  • Ed Kelle
Making Handmade Turning Tools
  • Graham Oakes
Pouring Vessel
  • Keith Holt
Practical Approach to Making Chairs
  • Matt Wadja
Sharpening—Panel Discussion
  • Jon Siegel
Spiral Form
  • Keith Tompkins
Turned Rectangular Lidded Box
  • Mark St. Leger
Turning Palm Nuts
  • Angelo Iafrate
Twice-Turned Bowl
  • Richard Angus
2008
Choosing Hand Planes
  • Dave Anderson
Coloring with Spray Finishes
  • Bruce Hamilton
Filling Grain
  • Terri Masaschi
Green Wood, Rustic Furniture
  • Paul Ruhlmann
Overview of Spray Finishes
  • Andy Charron
Polishing Out Finishes
  • Terri Masaschi
Repairing Finishes
  • Bruce Hamilton
Spray Finishing Techniques
  • Terry Moore
Spraying Water-Based Finishes
  • Andy Charron
2007
Handcrafted Violins
  • Jim Robinson
Ornamental Turning
  • Fred Armbruster
Tuning Up Woodshop Machines
  • David Upfill-Brown
2006
Bowl from a Thin Board
  • Stephen Gleasner
Cross-Grain Bowl Turning
  • Richard Angus
Design in Woodworking
  • Jere Osgood
Duplicating Spindle Turnings by Hand
  • Jim Kephart
Fresh Look at Segmented Turnings
  • Charles Faucher
Hollow Wooden Ornament
  • Bob Coleman
Horton Brass Hardware
  • Barbara Horton
Inside-Out Sculptural Forms
  • Linda Vangehuchten
Intro to Sharpening for Turning
  • Robert Rosand
Introduction to Hollow Forms
  • Brad Vietje
Making a Career as a Woodturner
  • Peter Bloch
Miniature Goblets
  • Dustin Coates
Natural Edge Goblet
  • Andy Motter
Reproducing Architectural Elements
  • Dick Batchelder
Tall Elegant Turned Vessels
  • Ken Keoughan
Turned, Textured and Carved Bowl
  • Al Stirt
Turning Endgrain
  • Andre Martel
2005
Chair Joinery
  • Tom McLaughlin
Complex Joinery
  • Phil Lowe
Curved Surface Joinery
  • David Lamb
Drawer Construction
  • Terry Moore
Going Pro
  • Sue Dunbar
Hand Cut Dovetails
  • Al Breed
Hand Tools
  • Mike Dunbar
Japanese Joinery
  • Jim Blauvelt
Joinery in Nontraditional Materials
  • Brian Sargent
Machine Mortise and Tenon Joinery
  • Matt Wajda
Portsmouth Furniture
  • Al Breed
Retrospective of the Work of John McAlevey
  • John McAlevey
Rustic Joinery
  • Paul Ruhlmann
Sand Shading Techniques
  • Janet Collins
Scraper Day 1995
  • John McAlevey
Shaker Legacy
  • Christian Becksvoort
Thru Tenon Joinery
  • Dan Faia
Traditional Carcasse Joinery
  • Will Neptune
Works Made With Native Wood
  • Hank Gilpin
2004
Jointers and Planers
  • Alan Mitchell
Making a Metal Body Plane
  • Lou Yelgin
Reducing Tearout in Woodturning—Panel Discussion
  • Jon Siegel
Relief Carving
  • David Lamb
Sharpening for Woodturning
  • Jon Siegel
2003
Carving a Ball Claw Foot
  • David Lamb
Concepts of Design, Slides and Commentary
  • Jacques Vesery
Contemporary Woodturning—Slide Presentation
  • David Ellsworth
Demilune Table
  • Tom McLaughlin
Making Small Bowls
  • Wendy Wilson
Making Tapered Sliding Dovetail Joints
  • Bill Thomas
MultiAxis Turning for Furniture and Fun
  • Charlie Sheaff
Natural Edge Bowls from Green Wood
  • Chris Strassner
Planing Wood
  • Garrett Hack
Planing Wood by Hand
  • Garrett Hack
Turning a Translucent Wood Lampshade
  • Peter Bloch
Turning Angels
  • Linda Van Gehuchten
2002
Bending Wood—Three Approaches
  • Dave Emmerson
Finishing Day 2002
  • Chris McGrody
2001
Bandsaw Basics
  • Jere Osgood
Dutch Foot Leg
  • Jon Siegel
Introduction to Veneering
  • Terry Moore
Three Boxmakers
  • Wayne Marcoux
2000
Bowl Turning
  • David Lancaster
Bowl Turning for Dummies
  • Luke Mann
Bowl Turning—Part 1
  • Walter Goodridge
Bowl Turning—Part 2
  • Walter Goodridge
Carving and Enhancing Vessels
  • Jacques Vesery
Design Conference—Part 1
  • Phil Lowe
Design Conference—Part 2
  • Phil Lowe
Turned Christmas Ornaments
  • Wendy Wilson
Turning Small Gifts
  • Robert Rosand
What Are We Really Making—Panel Discussion
  • David Ellsworth
1999
Harvesting, Sawing and Drying Native Wood
  • Garrett Hack
Inlays
  • Garrett Hack
Is There Any Wood in NH Forests?
  • Ethan Howard
Jon Brooks Retrospective
  • Jon Brooks
Musical Instrument Day
  • Grant Taylor
Understanding Wood
  • Dr. Bruce Hoadley
1998
Advanced Sharpening for Woodcarving
  • Greg Plum
Carving Transitions and Focal Points
  • David Lamb
Carving Volutes
  • Bill Thomas
Celtic Knot Carving
  • Grant Taylor
Dust Collection Day
  • Dennis Swarda
Figure Carving
  • Dave Dupouy
Intro to Carving Tools and Sharpening
  • Greg Plum
Kitchen Cabinetry
  • Bruce Sanborn
Retrospective—David Lamb
  • David Lamb
1997
Art vs. Craft
  • Sam Azzara
Control, Comfort and Safety on the Lathe
  • Jim Kephart
Hand Planes
  • Garrett Hack
Hollow Vessels
  • Tim Elliot
Introduction to Woodturning
  • Jack Grube
Lectures for the NH Furniture Masters
  • Jere Osgood
NH Furniture Master's Exhibition—1997
  • Various NH Furniture Masters
Overview of Finishes and Stains
  • Terri Masaschi
Segmented Bowl Turning
  • Phil Bowman
Turning Composite Materials
  • Charlie Sheaff
Woodcarving Basics
  • Bill Thomas
Woodworking Injuries
  • Dr. Donald Eberly
1996
Care and Use of Old Tools
  • Mike Dunbar
Finishing Day 1996
  • Ted Blachly
GNHW Juried Exhibitions—1994 and 1996
  • Terry Moore
Intro to Woodturning
  • Jon Siegel
Living With Crafts Exhibition—1996
  • Various League of NH Craftsmen
1995
Sharpening Day
  • Terry Moore
Ultralight Wooden Boat
  • Lou Yelgin
1994
MultiAxis Spindle Turning
  • Mark Sfirri
1991
Handcut Dovetails
  • Terry Moore
Using Native Wood—Panel Discussion
  • Dustin Coates