Remember—Pictures Sell
Classified ads may be submitted to the site moderator. Please send an email with your item(s) and contact information to: Peter James at classified@gnhw.org.
Jun
19
2020
Excalibur Sliding Table
Excalibur sliding table. Fits most table saws. $75 or B.O.
Steve Winchester
269-2720
For Sale
Jun
14
2020
Freud 6” Dado Set
Like new. Never Used. Asking$60
Contact:
Lou Powell
240 Old Ridge Road
Strafford, NH
loup240@gmail.com
For Sale
Jun
14
2020
NEW Robert Sorby 1/2” Paring Chisel
Asking $40
Contact:
Lou Powell
240 Old Ridge Road
Strafford, NH
loup240@gmail.com
For Sale
Jun
10
2020
Veritas Twin Screw vise
Used twin screw vise. Currently built in to a 32”x8”x2” jaw of Gancalo Alves but can readily be repurposed to a different jaw. Lists for $259 new. $125.
Contact:
Peter Breu
603-533-5529
603-533-5529
For Sale
May
25
2020
Apr
27
2020
Plano Model PC-2: 43” Vertical, Wall-Mounted Glue-Up Press
Plano Model PC-2: 43” vertical, wall-mounted glue-up press, mounted on 7-foot oak plan, with 4 pressure bar clamps. Ideal for gluing up table tops, etc. in a small shop.Never used, in new condition, was over $400, now only $250
For Sale
May
14
2019
Wood for Project Wanted
I am looking for a source for wood for a project - 6" x 6" that is 18" to 24" in length. It needs to be dry, free of checks, clear of knots, and not the center of the tree. I am looking for wood that will resist rot and the elements as the finished project will be outdoors and in all weather. My thoughts are: Alaskan yellow cedar, western red cedar, mahogany, Spanish cedar.
Wanted
Apr
25
2019
Wanted a 3 HP Floor Model Shaper
*Wanted* We’re looking for a 3hp floor model “Shaper” with 1/2” 3/4” and 1” spindles. This would be like a Delta HD or a Powermatic 27/2700 or similar.
Contact:
John Haven
603-630-5593
hts.jh21@ymail.com
Located in central New Hampshire
Wanted
Apr
16
2019
Someone to saw logs with portable mill
Looking for someone with a portable saw mill (saw miser) to cut up logs into boards and timbers. I estimate it would take a couple weeks.
The site is at 470 Chester Street (NH Route 121), Chester, N.H. with easy access to NH Route 121.
Contact:
603 303- 7079,
pchurchill@gsinet.net
Wanted
Apr
07
2019
Wanted Wooden Cam Clamps, 4", 6" and 8"
I am in search of wooden cam clamps, 4", 6" and 8".
Klemmsia, Stewart McDonald, or Woodcraft.
Thanks,
Roger Parent
roger.r.parent@gmail.com
text 802-299-6597
Wanted
Aug
14
2018
Woodworking Workshop in Holderness, NH
My name is Wendy Werner and I am the Recreation Director for the Town of Holderness. I am looking for someone t
Opportunities
Jul
24
2018
Wedding Bar
I'm reaching out because we are looking for someone to build a large, round bar for a wedding at the beginning of October, 2018.
Opportunities
Jun
13
2018
Wooden Fly Boxes from NH Sourced Wood
I am looking for someone who could make/or already makes wooden fly boxes made from NH sourced wood.
Thank you,
Jess
Can be reached at freyj90@gmail.com
Opportunities
Jun
13
2018
Mahogany Door Help
I am looking for a woodworker interested in working on a mahogany door. The laminate is peeling on the bottom part of the door. The house is in Bedford.
Thank you,
Micheline
Can be reached at hotchocolat22@hotmail.com
Opportunities
Jun
01
2017
Porch corner post
Hello
Porch corner post needs for an 1886 Victorian in East Kingston, NH
Dimensions: 6" x 98"
Opportunities
May
23
2017
Skilled Turner to Replicate Finials on Tall Chest
Bruce Hamilton, a long time Guild member, is in need of a skilled turner. See the rest here.
I am preserving a New England tall chest circa 1750 constructed in walnut. It was badly repaired in the past. After some research for the client it became clear that some elements were lost and replaced by some things that were not correct.
Opportunities