Remember—Pictures Sell
Classified ads may be submitted to the site moderator. Please send an email with your item(s) and contact information to: Peter James at classified@gnhw.org
Remember—Pictures Sell
Classified ads may be submitted to the site moderator. Please send an email with your item(s) and contact information to: Peter James at classified@gnhw.org
Plano Model PC-2: 43” vertical, wall-mounted glue-up press, mounted on 7-foot oak plan, with 4 pressure bar clamps. Ideal for gluing up table tops, etc. in a small shop.Never used, in new condition, was over $400, now only $250
I’m the original owner and it has had only occasional use. There are two modifications: one an adjustment-improving detail added by a machinist -- the brass bar and thumbscrews shown in lower right, and a wooden setup (in both photos) that I made for cutting 45-degree splines for 90-degree box corners.
Available spring of 2020, half a dozen ash planks milled from a 12 foot butt log. Felled on 4/6/19, milled in June and curing under tarp until next spring. All slabs are milled to 2.5 inches and are 135 to 140 inches long and vary from 12 to 24 inches in width. Some ant colony damage on lower portions of some slabs. Pricing from $60 to $120.
Photos of each slab available...
Rockler Tenon Jig. $50.
George Adams
63 Amherst Road
Merrimack, NH 03054 USA
Cell 1 603 426 0904
nhadamsfamily@comcast.net