What is the best way to add dust collection for a lathe? The chips seem to go everywhere, but land mostly in front of the lathe.—Joyce Hanna
Donna Banfield replies: Dust and chips are two separate things. Dust collection is done easily with a good quality dust collector and a 4˝ hose with a hood arrangement to capture it. In this case, I’m referring to the dust that is created during sanding. If it’s chips that you’re trying to grab as they come off the lathe, that’s a bit more challenging. Chips, especially the large curls that come off the bowl gouges, can quickly clog a 4˝ to 5˝ hose and fill a dust collection bag. Even a Cyclone system with a large drum will fill quickly, and that’s if you can find a way to direct those chips toward the hose. You are better off sweeping up those at the end of the day.
Claude Dupuis replies: I have never seen anyone try and capture the chips with a dust collection system. The chips are mostly in front of the lathe because that’s the direction in which most of the materials is removed. I only setup the dust collection for the sanding steps. The chips are easy scooped up into a waste barrel for removal.