ribbon sphereGuild Video Library

The topics covered over the years are many and hosted by some of the best and most talented woodworkers.

Read more about the Guild Video Library here...

Other Curated Videos

This is a curated selection of YouTube and other videos. Some are by individuals and others are a sampling from a wide variety of organizations.

There are over thirty topics cataloged here..something for everyone.

Displaying 185 Records
2008
Title Presenter Event Topics
Spray Finishing Techniques
Terry Moore Finishing Symposium 2008 Finishing
2007
Title Presenter Event Topics
Handcrafted Violins
Jim Robinson General Meeting Musical Instruments
Tuning Up Woodshop Machines
David Upfill-Brown General Meeting Stationary Tools
Ornamental Turning
Fred Armbruster Granite State Woodturners Meeting Woodturning, Spindle Turning
2006
Title Presenter Event Topics
Duplicating Spindle Turnings by Hand
Jim Kephart Turning Symposium 2006 Woodturning, Spindle Turning
Hollow Wooden Ornament
Bob Coleman Turning Symposium 2006 Hollow Turning, Woodturning
Cross-Grain Bowl Turning
Richard Angus Turning Symposium 2006 Woodturning, Hollow Turning
Introduction to Hollow Forms
Brad Vietje Turning Symposium 2006 Woodturning, Hollow Turning
Natural Edge Goblet
Andy Motter Turning Symposium 2006 Hollow Turning, Woodturning
Turned, Textured and Carved Bowl
Al Stirt Turning Symposium 2006 Hollow Turning, Woodturning, Carving
Inside-Out Sculptural Forms
Linda Vangehuchten Turning Symposium 2006 Woodturning, Sculptural Forms
Reproducing Architectural Elements
Dick Batchelder Turning Symposium 2006 Spindle Turning, Woodturning
Making a Career as a Woodturner
Peter Bloch Turning Symposium 2006 Professional
Intro to Sharpening for Turning
Robert Rosand Turning Symposium 2006 Woodturning, Sharpening
Miniature Goblets
Dustin Coates Turning Symposium 2006 Hollow Turning, Woodturning
Turning Endgrain
Andre Martel Turning Symposium 2006 Woodturning, Hollow Turning
Design in Woodworking
Jere Osgood General Meeting Design
Bowl from a Thin Board
Stephen Gleasner Turning Symposium 2006 Hollow Turning, Woodturning
Tall Elegant Turned Vessels
Ken Keoughan Turning Symposium 2006 Hollow Turning, Woodturning
Horton Brass Hardware
Barbara Horton General Meeting Hardware
Fresh Look at Segmented Turnings
Charles Faucher Turning Symposium 2006 Woodturning, Hollow Turning, Segmented Turning
2005
Title Presenter Event Topics
Complex Joinery
Phil Lowe Joinery Symposium 2005 Joinery
Works Made With Native Wood
Hank Gilpin Furniture Makers Symposium 2005 Furniture, Wood
Portsmouth Furniture
Al Breed Furniture Makers Symposium 2005 Furniture
Hand Tools
Mike Dunbar General Meeting Hand Tools
Traditional Carcasse Joinery
Will Neptune Joinery Symposium 2005 Joinery
Going Pro
Sue Dunbar General Meeting Professional
Rustic Joinery
Paul Ruhlmann Joinery Symposium 2005 Joinery
Japanese Joinery
Jim Blauvelt Joinery Symposium 2005 Joinery
Scraper Day 1995
John McAlevey General Meeting Scraper, Hand Tools, Sharpening
Retrospective of the Work of John McAlevey
John McAlevey Furniture Makers Symposium 2005 Furniture, Retrospective
Thru Tenon Joinery
Dan Faia Joinery Symposium 2005 Joinery
Chair Joinery
Tom McLaughlin Joinery Symposium 2005 Joinery, Chairs
Joinery in Nontraditional Materials
Brian Sargent Joinery Symposium 2005 Joinery
Curved Surface Joinery
David Lamb Joinery Symposium 2005 Joinery
Shaker Legacy
Christian Becksvoort Furniture Makers Symposium 2005 Furniture
Sand Shading Techniques
Janet Collins General Meeting Sand Shading
Hand Cut Dovetails
Al Breed Joinery Symposium 2005 Joinery, Dovetails
Drawer Construction
Terry Moore Joinery Symposium 2005 Joinery, Dovetails
Machine Mortise and Tenon Joinery
Matt Wajda Joinery Symposium 2005 Joinery
2004
Title Presenter Event Topics
Reducing Tearout in Woodturning—Panel Discussion
Jon Siegel Granite State Woodturners Meeting Woodturning
Relief Carving
David Lamb General Meeting Carving
Sharpening for Woodturning
Jon Siegel Granite State Woodturners Meeting Woodturning, Sharpening
Jointers and Planers
Alan Mitchell General Meeting Stationary Tools
Making a Metal Body Plane
Lou Yelgin General Meeting Hand Planes
2003
Title Presenter Event Topics
Turning a Translucent Wood Lampshade
Peter Bloch Turning Symposium 2003 Woodturning, Hollow Turning
Contemporary Woodturning—Slide Presentation
David Ellsworth Turning Symposium 2003 Woodturning
Concepts of Design, Slides and Commentary
Jacques Vesery Turning Symposium 2003 Woodturning, Design
Demilune Table
Tom McLaughlin General Meeting Furniture
Carving a Ball Claw Foot
David Lamb General Meeting Furniture, Carving
Turning Angels
Linda Van Gehuchten Turning Symposium 2003 Hollow Turning, Woodturning
MultiAxis Turning for Furniture and Fun
Charlie Sheaff Turning Symposium 2003 Woodturning, Spindle Turning
Making Tapered Sliding Dovetail Joints
Bill Thomas General Meeting Dovetails
Planing Wood
Garrett Hack General Meeting Hand Tools, Hand Planes
Planing Wood by Hand
Garrett Hack General Meeting Hand Planes, Hand Tools
Natural Edge Bowls from Green Wood
Chris Strassner Turning Symposium 2003 Woodturning, Hollow Turning
Making Small Bowls
Wendy Wilson Turning Symposium 2003 Hollow Turning, Woodturning
2002
Title Presenter Event Topics
Finishing Day 2002
Chris McGrody General Meeting Finishing
Bending Wood—Three Approaches
Dave Emmerson General Meeting Bending Wood
2001
Title Presenter Event Topics
Three Boxmakers
Wayne Marcoux General Meeting Furniture, Joinery
Dutch Foot Leg
Jon Siegel General Meeting Woodturning, Spindle Turning
Bandsaw Basics
Jere Osgood General Meeting Stationary Tools
Introduction to Veneering
Terry Moore General Meeting Veneering
2000
Title Presenter Event Topics
Bowl Turning for Dummies
Luke Mann Turning Symposium 2000 Woodturning, Hollow Turning
Carving and Enhancing Vessels
Jacques Vesery Turning Symposium 2000 Carving, Woodturning, Hollow Turning
Bowl Turning
David Lancaster Turning Symposium 2000 Woodturning, Hollow Turning
Bowl Turning—Part 1
Walter Goodridge Turning Symposium 2000 Woodturning, Hollow Turning
Turned Christmas Ornaments
Wendy Wilson Turning Symposium 2000 Woodturning
Design Conference—Part 1
Phil Lowe General Meeting Design
Turning Small Gifts
Robert Rosand Turning Symposium 2000 Woodturning
Bowl Turning—Part 2
Walter Goodridge Turning Symposium 2000 Hollow Turning, Woodturning
What Are We Really Making—Panel Discussion
David Ellsworth Turning Symposium 2000 Woodturning
Design Conference—Part 2
Phil Lowe General Meeting Design
1999
Title Presenter Event Topics
Inlays
Garrett Hack General Meeting Inlay
Jon Brooks Retrospective
Jon Brooks General Meeting Retrospective, Design
Displaying 200 Records
Title Presenter Organization Topics
Bandsaw Basics
Tommy MacDonald Rough Cut Stationary Tools
Rob Cosman's Latest Workbench, Maple & Walnut
Rob Cosman robcosman.com Benches
Rubbing Out a Finish – Part 2
Charles Neil No Organization Finishing
Lamello C3 Classic Biscuit joiner
No Name Tools and Timber Joinery
Precision Plane Setup with Wooden Block Trick
Deneb Puchalski Lie-Nielsen Toolworks Hand Tools
Chip Carving—How to Sharpen Your Knife
Steve Hallman MyChipCarving Carving, Sharpening
Band Saw Veneer
Matthew Werner William NG Woodworks Stationary Tools, Techniques
Frank Klausz Woodworking Workshop Tour
Frank Klausz Wood and Shop Promo
Handcrafted—Guitar
Eitan Bartal No Organization Luthier
NH Furniture Masters Auction Highlights
No Name New Hampshire Furniture Masters Promo, Furniture
Air Drying Fresh Cut Lumber
George Vondriska Woodworkers Guild of America Lumber
The Woodwright's Shop: Preparing Wood
Roy Underhill The Woodwright Shop Wood
Bob, It's Finished
Dr. John Vardiman Texas Country Reporter Boats
Making Dowels for Joinery—Lie-Nielsen Dowel Plate
No Name Wortheffort Jigs/Fixtures, Joinery
Wood Finishing Techniques—Banquette Project
Tom McLaughlin Epic Woodworking Finishing
GNHW Auction Sample
John Siegel Guild of NH Woodworkers Promo
Using a Flush Trim Router Bit
George Vondriska Woodworkers Guild of America Router
Seating Your Socket Chisel Handle
Deneb Puchalski Lie-Nielsen Toolworks Hand Tools
Double-Bevel Paring Chisel Sharpening
Steve Branam CloseGrain.com Sharpening
Sam Maloof: Woodworking Genius
Sam Maloof Reserve Channel Promo
Planing End Grain
Rob Cosman robcosman.com Hand Tools, Sharpening
Founders 2
Bob Couch Guild of NH Woodworkers Promo
How to Sharpen Hand Plane Irons
No Name Lie-Nielsen Toolworks Sharpening
Building a Cheap, Simple Disc Sander
Cosmas Bauer No Organization Stationary Tools
Miter Shooting Board, Version 1
Steve Branam CloseGrain.com Jigs/Fixtures
How to Shim a Jointer's Outfeed Table
Ben Blackmar FineWoodworking Stationary Tools
How to use Hand Planes
Frank Strazza Heritage School of Woodworking Hand Tools
GNHW Public Service Announcement
Bob Couch Guild of NH Woodworkers Promo
Table Saw Safety
George Vondriska Woodworkers Guild of America Stationary Tools, Safety
Mitered Mortise & Tenon Joint
Yeung Chan William NG Woodworks Joinery
Squaring a Combination Square
Robert W. Lang Popular Woodworking Hand Tools, Tips/Techniques
Woodturning Basics—Wood Turning: Scrapers
Rex Burningham Expertvillage Turning
Wood Knots & Other Defects
Steve Johnson The Down to Earth Woodworks Wood, Tips/Techniques, Finishing
Dovetail Joint with Hand Tools
Paul Sellers Homestead Heritage School Hand Tools, Joinery, Dovetails
Coiling a Band Saw Blade
George Vondriska Woodworkers Guild of America Stationary Tools, Tips/Techniques
Tips for Cutting Half Blind Dovetails Part 1
Tim Rousseau Lie-Nielsen Toolworks Joinery, Dovetails
Clamp Storage and Organization
Steve Ramsey Woodworking For Mere Mortals Shop, Clamps
How to Tune Up a Block Plane
Michael Pekovich FineWoodworking Hand Tools
David Lamb, "Four Seasons of Acadia", 2016
David Lamb New Hampshire Furniture Masters Association Promo, Furniture
Hand Planing & Shooting
Scott Horsburgh No Organization Hand Tools
Offset Reveal with a Biscuit Joiner
Paul Mayer Woodworkers Guild of America Tips/Techniques
Honing Guide Modification
Deneb Puchalski Lie-Nielsen Toolworks Sharpening
Using Paper Glue Joints for Woodturning Projects
Ernie Conover WoodworkersJournal Tips/Techniques, Turning
Smoothing Plane Tips and Techniques
Garrett Hack FineWoodworking Hand Tools
Two Stones And A Strop
Steve Branam CloseGrain.com Hand Tools, Sharpening
Sharpening a Scraper
Rickey LoDico No Organization Hand Tools, Sharpening
Farm Tables
David Ellison No Organization Promo
Saws Part 2— Sharpening a Cross Cut Saw
Thomas Lie-Nielsen Lie-Nielsen Toolworks Hand Tools, Sharpening, Tips/Techniques
How to Turn a Knitting Bowl
Ernie Conover WoodworkersJournal Turning
Romancing the Shop—Turning a Tool Handle
No Name FineWoodworking Shop, Turning
Finishing Curly Maple with Tom McLaughlin
Tom McLaughlin Epic Woodworking Finishing
Creating a Dovetail Joint with Hand Tools
Paul Sellers Homestead Heritage School Dovetails, Hand Tools
Planer Knife Honing Jig
Steve Maskery No Organization Jigs/Fixtures, Sharpening
Northwest Woodworking
Gary Rogowski Northwest Woodworking Studio Promo
Flattening a Board
Shannon Rogers RenaissanceWW Hand Tools, Tips/Techniques
Build a Mitre Fence
Tommy MacDonald Rough Cut Jigs/Fixtures
Wood Turning - A Beginners Guide—A Goblet
Mike Waldt No Organization Turning
Keyway Keys Guarantee Accuracy
Bob Van Dyke Fine Woodworking Magazine Tips/Techniques, Jigs/Fixtures
Shop Made Bench Jigs
No Name No Organization Benches, Jigs/Fixtures
Mortise & Tenon Joint Accuracy
Matthias Wandel No Organization Joinery
Bookshelf
Chad Stanton American Woodworker Magazine Furniture
Roubo's Cabinetmaker's Bench
No Name Benchcrafted Hand Tools, Benches, Promo
Sharp Chisels
Tommy MacDonald Rough Cut Hand Tools, Sharpening
Decorating a Bowl
Sam Angelo WyomingWoodTurner Turning
Turning Roll of Aluminum Foil into Chef’s Knife
No Name No Organization Sharpening, Techniques, Metalworking
Screws – Some Tips
Charles Neil No Organization Fasteners, Tips/Techniques
Cutting Dovetails
Scott Horsburgh No Organization Joinery, Dovetails
Roy Underhill's Bench Hooks
Roy Underhill Lie-Nielsen Toolworks Hand Tools, Benchhooks
Interview with Sam Maloof—1983
Sam Maloof Handmade in America Interview
How to Cut Logs for Turning
Ralph Lindholm TheGeekGroup Turning, Wood
Sharpening Plane Blade—1000 vs 16000 Grit
Rob Cosman robcosman.com Sharpening, Hand Tools
Sculpting a Maloof Chair Seat
Scott Morrison No Organization Furniture
Cutting Lumber from Logs
George Vondriska Woodworkers Guild of America Lumber
Chopping a Mortise: An Inside Look
Peter Follansbee Lie-Nielsen Toolworks Hand Tools, Joinery
Chip Carving Straight Lines
Steve Hallman MyChipCarving Carving