Guild Video LibraryThe topics covered over the years are many and hosted by some of the best and most talented woodworkers.
Read more about the Guild Video Library here...
This is a curated selection of YouTube and other videos. Some are by individuals and others are a sampling from a wide variety of organizations.
There are over thirty topics cataloged here..something for everyone.
| Title | Presenter | Event | Topics |
|---|---|---|---|
Jon Brooks Retrospective |
Jon Brooks | General Meeting | Retrospective, Design |
Understanding Wood |
Dr. Bruce Hoadley | Wood Symposium 1999 | Wood |
Musical Instrument Day |
Grant Taylor | General Meeting | Musical Instruments |
Is There Any Wood in NH Forests? |
Ethan Howard | Wood Symposium 1999 | Wood |
Harvesting, Sawing and Drying Native Wood |
Garrett Hack | General Meeting | Wood |
| Title | Presenter | Event | Topics |
|---|---|---|---|
Intro to Carving Tools and Sharpening |
Greg Plum | Carving Symposium 1998 | Carving, Sharpening |
Celtic Knot Carving |
Grant Taylor | Carving Symposium 1998 | Carving |
Carving Volutes |
Bill Thomas | Carving Symposium 1998 | Carving |
Retrospective—David Lamb |
David Lamb | General Meeting | Retrospective |
Dust Collection Day |
Dennis Swarda | General Meeting | Dust Collection |
Advanced Sharpening for Woodcarving |
Greg Plum | Carving Symposium 1998 | Carving, Sharpening |
Figure Carving |
Dave Dupouy | Carving Symposium 1998 | Carving |
Kitchen Cabinetry |
Bruce Sanborn | General Meeting | Furniture, Design, Kitchen |
Carving Transitions and Focal Points |
David Lamb | Carving Symposium 1998 | Carving |
| Title | Presenter | Event | Topics |
|---|---|---|---|
Woodworking Injuries |
Dr. Donald Eberly | General Meeting | Health |
Hollow Vessels |
Tim Elliot | Turning Symposium 1997 | Woodturning, Hollow Turning |
Segmented Bowl Turning |
Phil Bowman | Turning Symposium 1997 | Woodturning, Hollow Turning |
Overview of Finishes and Stains |
Terri Masaschi | General Meeting | Finishing |
Hand Planes |
Garrett Hack | General Meeting | Hand Tools, Hand Planes |
Turning Composite Materials |
Charlie Sheaff | Turning Symposium 1997 | Woodturning, Hollow Turning |
Introduction to Woodturning |
Jack Grube | Turning Symposium 1997 | Woodturning, Hollow Turning, Spindle Turning |
Woodcarving Basics |
Bill Thomas | General Meeting | Carving |
NH Furniture Master's Exhibition—1997 |
Various NH Furniture Masters | Exhibit | Furniture, Exhibit |
Art vs. Craft |
Sam Azzara | Turning Symposium 1997 | Woodturning |
Lectures for the NH Furniture Masters |
Jere Osgood | Exhibit | Furniture |
Control, Comfort and Safety on the Lathe |
Jim Kephart | Turning Symposium 1997 | Woodturning |
| Title | Presenter | Event | Topics |
|---|---|---|---|
GNHW Juried Exhibitions—1994 and 1996 |
Terry Moore | Exhibit | Furniture, Exhibit |
Care and Use of Old Tools |
Mike Dunbar | General Meeting | Hand Tools |
Living With Crafts Exhibition—1996 |
Various League of NH Craftsmen | Exhibit | Furniture, Exhibit |
Finishing Day 1996 |
Ted Blachly | General Meeting | Finishing |
Intro to Woodturning |
Jon Siegel | General Meeting | Woodturning, Hollow Turning, Spindle Turning |
| Title | Presenter | Event | Topics |
|---|---|---|---|
Sharpening Day |
Terry Moore | General Meeting | Sharpening |
Ultralight Wooden Boat |
Lou Yelgin | General Meeting | Boats |
| Title | Presenter | Event | Topics |
|---|---|---|---|
MultiAxis Spindle Turning |
Mark Sfirri | General Meeting | Woodturning, Spindle Turning |
| Title | Presenter | Event | Topics |
|---|---|---|---|
Handcut Dovetails |
Terry Moore | General Meeting | Dovetails |
Using Native Wood—Panel Discussion |
Dustin Coates | General Meeting | Wood |
| Title | Presenter | Organization | Topics |
|---|---|---|---|
Founders 3 |
Bob Couch | Guild of NH Woodworkers | Promo |
Size of a Dado Head |
George Vondriska | Woodworkers Guild of America | Stationary Tools |
Five Cuts to a "Perfect" Cross-Cut Sled |
William Ng | William NG Woodworks | Jigs/Fixtures |
Miter Shooting Board 2 |
Steve Branam | CloseGrain.com | Jigs/Fixtures |
Dressing Rough Lumber |
Colin Knecht | WoodWorkWeb | Lumber |
Rob Cosman's Dovetail Saw |
Rob Cosman | robcosman.com | Hand Tools |
Mike Whalley Bench Dedication |
Jon Siegel | NH House of Representatives | Furniture |
Jointer Safety |
George Vondriska | Woodworkers Guild of America | Stationary Tools |
Simple Hand Rub Finish |
Brian Mille | William NG Woodworks | Finishing |
Inside Lie-Nielsen Toolworks |
Thomas Lie-Nielsen | Lie-Nielsen Toolworks | Promo |
Mini Workbench Makes Detail Work Easier |
Ed Pirnik | FineWoodworking | Benches |
How to Flatten a Board |
M. Scott Morton | Highland Woodworking | Lumber |
Picture Frame & Shooting Board Miter |
No Name | Homestead Heritage School | Hand Tools, Joinery |
Sight Drill Press with Laser |
George Vondriska | Woodworkers Guild of America | Stationary Tools, Tips/Techniques |
Tips for Cutting Half Blind Dovetails Part 2 |
Tim Rousseau | Lie-Nielsen Toolworks | Joinery, Dovetails |
Make a Wood Mallet |
Steve Ramsey | Woodworking For Mere Mortals | Hand Tools, Shop |
How to Clean a Router Bit |
Ed Pirnik | FineWoodworking | Router |
How to Repair Wood Cracks |
George Vondriska | WoodWorkers Guild Of America | Wood, Tips/Techniques, Finishing |
Freehand Sharpening Plane Iron |
Old Tool Alf | No Organization | Hand Tools, Sharpening |
Nakashima Woodworker |
Bob Krist | No Organization | Promo |
Beading Tool: Setup, Use and Sharpening |
Thomas Lie-Nielsen | Lie-Nielsen Toolworks | Sharpening, Hand Tools |
Turning a Three Legged Stool |
Ernie Conover | WoodworkersJournal | Turning, Furniture |
Educating Future Generation of Woodworkers |
Garrett Hack | ArtisanMediaLtd | Interview |
Quick Cabinet Drawers |
Steve Johnson | Highland Woodworking | Furniture |
Dovetail Jig Buying Advice |
George Vondriska | Woodworkers Guild of America | Jigs/Fixtures, Joinery, Router |
George Nakashima Woodworker |
No Name | Nakashima Studio | Promo |
Saws Part 3—Jointing Saws, Care & Maintenance |
Thomas Lie-Nielsen | Lie-Nielsen Toolworks | Hand Tools, Sharpening, Tips/Techniques |
How to Sharpen a Woodworking Handsaw |
Paul Sellers | No Organization | Hand Tools, Sharpening |
Fitting Drawers with a Handplane |
Matt Kenney | FineWoodworking | Hand Tools, Tips/Techniques |
Making an Octagonal Post |
Tom McLaughlin | Epic Woodworking | Tips/Techniques |
Cabinet Door Assembly |
George Vondriska | Woodworkers Guild of America | Furniture, Assembly, Tips/Techniques |
Simplified Router Fence Setups |
George Vondriska | Woodworkers Guild of America | Joinery, Router |
Traditional Woodworking Demonstration |
Thomas Day | North Carolina Museum of History | Hand Tools, Dovetails, Joinery |
Have Broad Axe Will Travel |
Roy Underhill | TED | Hand Tools, Tips/Techniques |
Plane Basics |
Tommy MacDonald | Rough Cut | Hand Tools |
Making a Cherry Half-round Desk Drawer |
Tom McLaughlin | Epic Woodworking | Furniture |
LMI Plate Joining Jig |
No Name | Luthiers Mercantile Int. | Luthier, Jigs/Fixtures |
Bending Wood to Make Furniture |
Kent Perdue | No Organization | Bending Wood |
Jointers – Setting & Using |
Charles Neil | No Organization | Joinery, Stationary Tools |
Carpenter Belt |
George Vondriska | Woodworkers Guild of America | Hand Tools |
Shaker Bench Plans |
No Name | Benchcrafted | Benches, Promo |
Tablesaw L and Aux Fences |
Tommy MacDonald | Rough Cut | Stationary Tools, Jigs/Fixtures |
Wood Turning - Beginners Guide—A Lidded Box |
Mike Waldt | No Organization | Turning |
Lie-Nielsen vs. Veritas Bench Planes |
Matt Estlea | No Organization | Hand Tools |
Rubbing Out a Finish – Part 1 |
Charles Neil | No Organization | Finishing |
Why I Love My Biscuit Joiner |
Paul Mayer | Woodworkers Guild of America | Joinery |
Sharpening the Fishtail and Corner Chisels |
Deneb Puchalski | Lie-Nielsen Toolworks | Hand Tools, Sharpening |
Nakashima Table |
No Name | Atticmag | Furniture |
Make Your Own Colored Wood Putty |
Brian Miller | William NG Woodworks | Finishing |
Hand Cut Dovetails—A Different Approach |
Rob Cosman | robcosman.com | Joinery, Dovetails |